Fume Extractors
Fume Extractors
Solder fumes irritate eyes, nose and throat of workers and can cause equipment failures if they accumulate on machinery. For these reasons, we recommend a fume extractor and offer several solutions for various production environments.
VAC- 4001A / VAC-4002A
This triple filtering design allows for 99.97% efficiency. The equipped DC motor is low noise, low vibration and low power consumption. It’s high power motor generates large air flow.
| Type | VAC-3000 |
|---|---|
| Filtering Rate |
More than 95%, 0.3μm |
| Vacuum Type |
Ejector |
| Air Supply |
0.5MPa (Dry air) |
| Noise Level |
Below 82 dB |
| Size (WxDxH) |
194x170x308 mm |
| Weight | Approx. 4.0kg |
BOFA System15 and Purex
The integral fume extraction system (Bofa 15) is a self-contained fume removal system. Solder fumes are vacuumed through a silicone tube mounted directly to the point of soldering. The combination of the two filtering units (Pre-filter & HEPA filter) removes all harmful gases, thus preventing flux build-up on the iron and extending tip life all while keeping the environment clean and safe.
| Type | System15 |
Purex |
|---|---|---|
| Filtering Rate |
More than 99.997% (0.3μm, HEPA) | More than 99.997% |
| Vacuum Type |
IP54 Synchronous (brushless) motor |
- |
| Air Flow |
70m³/h | 100m³/h, 59cf/m |
| Noise Level |
Below 50 dB |
52 dBA |
| Wattage | - | 50W / 75W |
| Size (WxDxH) |
360x330x500 mm |
455x480x720 mm |
| Power |
AC230V 1ph 50Hz or 110V 1ph 60Hz | AC 120V or 230V, +/- 10% |