Solder balls during the soldering process are a primary cause of rework and inspection complications, especially in fine-pitch applications.  Our ZSB feeder system eliminates those issues by combating solder ball formation from the start.

Solder fumes are detrimental to human health and that of some equipment.  That's why we recommend using fume extractors and offer several solutions for differing production and factory environments and ventilation systems.

This wire feeder can control feeding amount precisely via its pulse motor.  It can also be upgraded with the ZSB roller blade as an optional attachment to prevent solder balls and flux spattering.

This unit increases the efficiency of manual solder work. “Handling the iron unit” and “Feeding the solder” are two actions that can be done with one hand. The iron units can come in either pen or pistol type.

The SSA system is designed for use in automated environments such as filling solder pots automatically, feeding solder for copper joints, flame applications etc.  If used to control the solder liquid surface level, it automatically keeps the level constant.

Designed for use with sleeve-soldering heads or robots, this cleaner heats the ceramic sleeve to burn out the dross inside.

Designed for use with sleeve-soldering heads or robots, this cleaner sports a rotating drill bit to remove dross from the inside of the sleeve.

These meter can measure nitrogen concentration up to: 99.9%, O2 concentration: 25%.  The level of N2 gas generation is measured precisely.

By creating a bubble around the soldering surface, nitrogen gas eliminates oxidation of the soldering tip and soldering surface, thus minimizing solder defects and increasing tip life. 

This position calibration camera has been designed exclusively for use with our soldering robots

The micro cameras easily attach to the Apollo soldering robot. The function of the CMOS camera is for teaching and process monitoring. Due to the miniature size, each camera can be easily integrated

The well-designed sensor allows for easy placement and accurate readings for iron tips. It achieves stable measurement of temperature within seconds.

By connecting to CSS-2100 of CMOS camera, this recorder allows real-time recording of the soldering process without a PC. The stored data on the SD card makes it easy to transfer to a PC.

Pre-heaters heat the solder wire and internal flux to help prevent solder balls and spattering, reduce tact/cycle time, and improve quality in both lead-free and tin/lead applications, especially when using large-diameter wire.

These units utilize air to clean iron tips.  2 models are available.

This optical sensor prevents misalignment despite anomalies such as a worn iron tip.

We offer 3 models of rotary cleaners designed to work with our robots to keep their iron soldering tips clean and operating at optimal efficiency.