We offer 3 models of rotary cleaners designed to work with our robots to keep their iron soldering tips clean and operating at optimal efficiency.
Read More
Pre-heaters heat the solder wire and internal flux to help prevent solder balls and spattering, reduce tact/cycle time, and improve quality in both lead-free and tin/lead applications, especially when using large-diameter wire.
Read More
These units utilize air to clean iron tips. 2 models are available.
Read More
By connecting to CSS-2100 of CMOS camera, this recorder allows real-time recording of the soldering process without a PC. The stored data on the SD card makes it easy to transfer to a PC.
Read More
The well-designed sensor allows for easy placement and accurate readings for iron tips. It achieves stable measurement of temperature within seconds.
Read More
The micro cameras easily attach to the Apollo soldering robot. The function of the CMOS camera is for teaching and process monitoring. Due to the miniature size, each camera can be easily integrated
Read More
This position calibration camera has been designed exclusively for use with our soldering robots
Read More
By creating a bubble around the soldering surface, nitrogen gas eliminates oxidation of the soldering tip and soldering surface, thus minimizing solder defects and increasing tip life.
Read More
These meter can measure nitrogen concentration up to: 99.9%, O2 concentration: 25%. The level of N2 gas generation is measured precisely.
Read More
Designed for use with sleeve-soldering heads or robots, this cleaner sports a rotating drill bit to remove dross from the inside of the sleeve.
Read More
Designed for use with sleeve-soldering heads or robots, this cleaner heats the ceramic sleeve to burn out the dross inside.
Read More
This unit increases the efficiency of manual solder work. “Handling the iron unit” and “Feeding the solder” are two actions that can be done with one hand. The iron units can come in either pen or pistol type
Read More
The SSA system is designed for use in automated environments such as filling solder pots automatically, feeding solder for copper joints, flame applications etc. If used to control the solder liquid surface level, it automatically keeps the level constant.
Read More
This wire feeder can control feeding amount precisely via its pulse motor. It can also be upgraded with the ZSB roller blade as an optional attachment to prevent solder balls and flux spattering.
Read More
Solder fumes are detrimental to human health and that of some equipment. That's why we recommend using fume extractors and offer several solutions for differing production and factory environments and ventilation systems.
Read More
This non-contact radiation thermometer (minimum φ0.25mm) measures the temperature of the soldering point in real time.
Read More
Solder balls during the soldering process are a primary cause of rework and inspection complications, especially in fine-pitch applications. Our ZSB feeder system eliminates those issues by combating solder ball formation from the start.
Read More
This optical sensor prevents misalignment despite anomalies such as a worn iron tip.
Read More